Strong factory | Excellent quality
used to crimp the composite insulator fittings and insulating rods into one piece.
Application
●This machine is used to crimp composite insulator fittings and insulating rods together.
●It uses uniform shrinking and deformation of the fitting to create slight elastic deformation on the insulating rod’s outer circle.
This generates interference friction force between the fitting and the rod, allowing it to withstand high tensile and torsional loads.
Model:
●SH-YJ-1: 0.5m(L) x 0.5m(W) x 1.5m(H) ;800kg(weight)
●SH-YJ-2: 1.0m(L) x 1.2m(W) x 1.8m(H) :1500kg(weight)
Packaging
Cartons packed with wooden pallet
No. | Specification | Details |
1 | Main Cylinder Original Thrust | 1200 kN |
2 | Conical Crimping Amplification Factor | 3 |
3 | Crimping Precision | Roundness and Taper < 0.1 mm (Taper measured within 75 mm) |
4 | Maximum Crimping Outer Diameter | φ70 mm (Custom sizes available if >70 mm) |
5 | Minimum Crimping Outer Diameter | φ20 mm |
6 | Maximum Opening Capacity | Module Number + 35 mm; Without Module Return: φ153 mm |
7 | Maximum Crimping Length | 75 mm |
8 | Structure | Eight-Petal |
9 | Control Method | Hydraulic Control |
10 | Motor Power | 4 KW |
11 | High-Pressure Oil Pump | Flow Rate: 101/min Rated Pressure: 16 MPa |
12 | Oil Tank Capacity | 70 kg |
13 | Dimensions | Length × Width × Height: (600 × 700 × 1600) mm |
14 | Total Weight | 800 kg |
NOTES:
The size of the insulator crimping machine can be customized.
Electrical Schematic Diagram:
If you have any questions, feedback or comments, please write down the form below and we will reply you in time.
Links: 1688 Factory Store State Grid
Copyright © Xinji Shengheng Electric Power Equipment Factory All rights reserved
Reviews
There are no reviews yet.